Accessory Drive Belt - DAYCO PRODUCTS LLC - New DAYCO PRODUCTS LLC Supersedes E040290
Part: 4PK755EE- Dayco(R) elaTM (elastic) or stretch belts are specifically designed for two, three, and four point drives that are designed to use self-tensioning belts. Although these belts may look like standard poly rib belts, they are very different. These specially designed elastic belts have self-tensioning capabilities required by specific OE drives. Vehicles that are manufactured with stretch belts must replace them with stretch belts. These belts are not interchangeable with standard constructed belts of their same size. Dayco(R) elaTM belts utilize a proprietary EPDM construction that is designed to elongate over the fixed pulley system, and then maintain the required belt tension over the life of the belt. The backbone behind the Dayco(R) elaTM belt is its specially developed polyamide tensile member, which allows for high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive. This belt construction incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance. Stretch belts have unique installation instructions depending on the OE application. Installation may require a specialized tool for the application or a simple zip tie. Do not attempt to install by prying the belt on the pulleys. Dayco provides detailed instructions on the reverse side of the sleeve.
- Manufacturer:
- DAYCO PRODUCTS LLC
- Part Number:
- 4PK755EE
- Manufacturer Part Number:
- 4PK755EE
- Description:
- Accessory Drive Belt
- Long Description:
- Supersedes E040290
- Part Type:
- Accessory Drive Belt
- Category:
- Belts/Cooling
- Subcategory:
- Accessory Drive Belt System Components
Product Details
- Condition:
- New
- Product Fit:
- Direct Fit
- Weight:
- 0.139 pounds
- Height:
- 0.56"
- Width:
- 4"
- Length:
- 12.47"
- UOM:
- EA
- Quantity Sold:
- Sold individually
- Qty Per Application:
- 0
- Minimum Order Qty:
- 1
- Item GTIN:
- 070964270016
Technical Details
- CTO
- IT
- Harmonized Tariff Code (Schedule B)
- 4010313000
- Life Cycle Status Code
- 2
- SDR Required Flag
- N
- NPS
- D
- Part Number - Old
- E040290
- Short Product Description
- V-RIBBED BELT
- Long Product Description
- POLY RIB BELT, DAYCO
- Marketing Description
- Dayco(R) elaTM (elastic) or stretch belts are specifically designed for two, three, and four point drives that are designed to use self-tensioning belts. Although these belts may look like standard poly rib belts, they are very different. These specially designed elastic belts have self-tensioning capabilities required by specific OE drives. Vehicles that are manufactured with stretch belts must replace them with stretch belts. These belts are not interchangeable with standard constructed belts of their same size. Dayco(R) elaTM belts utilize a proprietary EPDM construction that is designed to elongate over the fixed pulley system, and then maintain the required belt tension over the life of the belt. The backbone behind the Dayco(R) elaTM belt is its specially developed polyamide tensile member, which allows for high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive. This belt construction incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance. Stretch belts have unique installation instructions depending on the OE application. Installation may require a specialized tool for the application or a simple zip tie. Do not attempt to install by prying the belt on the pulleys. Dayco provides detailed instructions on the reverse side of the sleeve.
- Rib Quantity
- 4
- Rib Depth
- Standard
- Rib Profile
- Straight Rib
- Material
- EPDM4
- Color
- Black
- Maximum Operating Temperature
- 100 C
- Maximum Operating Temperature
- 212 F
- Standards
- SAE J1459
- Effective Length
- 754.99 mm
- Effective Length
- 29.724 in
- Minimum Operating Temperature
- -45 F
- Minimum Operating Temperature
- -42.7 C
- Top Width
- .54 in
- Cross Section
- K-Section
- Free Length
- 29.0 in
- Free Length
- 736.600 mm
- Outside Circumference
- 0 in
- Outside Circumference
- 0 mm
Specifications
The DAYCO PRODUCTS LLC Accessory Drive Belt contains no remanufactured components, and is designed to operate in either city or highway driving.
This part fits at least: 8 vehicles
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 2015 | Smart | Fortwo | 1.0L 1000cc L3 GAS FI VIN - 70HP DOHC Naturally Aspirated | [Supersedes E040290] Air Conditioning; Quantity needed per vehicle: 1 |
| 2014 | Smart | Fortwo | 1.0L 1000cc L3 GAS FI VIN - 70HP DOHC Naturally Aspirated | [Supersedes E040290] Air Conditioning; Quantity needed per vehicle: 1 |
| 2013 | Smart | Fortwo | 1.0L 1000cc L3 GAS FI VIN - 70HP DOHC Naturally Aspirated | [Supersedes E040290] Air Conditioning; Quantity needed per vehicle: 1 |
| 2012 | Smart | Fortwo | 1.0L 1000cc L3 GAS FI VIN - 70HP DOHC Naturally Aspirated | [Supersedes E040290] Air Conditioning; Quantity needed per vehicle: 1 |
| 2011 | Smart | Fortwo | 1.0L 1000cc L3 GAS FI VIN - 70HP DOHC Naturally Aspirated | [Supersedes E040290] Air Conditioning; Quantity needed per vehicle: 1 |
| 2010 | Smart | Fortwo | 1.0L 1000cc L3 GAS FI VIN - 70HP DOHC Naturally Aspirated | [Supersedes E040290] Air Conditioning; Quantity needed per vehicle: 1 |
| 2009 | Smart | Fortwo | 1.0L 1000cc L3 GAS FI VIN - 70HP DOHC Naturally Aspirated | [Supersedes E040290] Air Conditioning; Quantity needed per vehicle: 1 |
| 2008 | Smart | Fortwo | 1.0L 1000cc L3 GAS FI VIN - 70HP DOHC Naturally Aspirated | [Supersedes E040290] Air Conditioning; Quantity needed per vehicle: 1 |
Warranty Information
New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages.
For other parts, we provide a limited warranty of 90 days from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quality. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable.
All items are given a limited 90-days warranty period by the manufacturer. The manufacturer will allow the parts to be covered by their warranty provided that the part was not modified by the buyer.
Under NO circumstances will our liability exceed the amount of the original sale.
Products damaged as a result of abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty.
The warranty does not cover airfreight charges, labor expenses, towing expenses, or rental car expenses resulting from installation errors. Return shipping is the responsibility of the buyer. We will not reimburse any return shipping charges incurred.
All returned items must have the RA (Return Authorization) number written outside the shipping box prior to return. The RA Numbers can be obtained by creating a return from within your account. Returned items without RA numbers will not be accepted.
Our liability does not cover lost or stolen packages mailed back by the customer containing the parts being claimed under warranty. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer.