A/C Receiver Drier - FOUR SEASONS - New FOUR SEASONS Filter Drier
Part: 83125- The accumulator / filter drier acts as a filter by removing moisture and contaminants from the air conditioning system. Such contaminants cannot be removed by flushing, therefore replacing the accumulator / filter drier is essential.
- The absorption of moisture in the system is done through the use of a desiccant bag. A leaking or "open" system can cause the bag to become saturated within a few hours making the accumulator/filter drier ineffective.
- As a manufacturer in accumulator/filter driers, we offer quality units produced in a ISO/TS16949 & ISO14001 certified facility. State-of-the-art equipment and high quality materials ensure product integrity for long lasting performance customers rely on.
- Replacement of the accumulator / filter drier is required to validate compressor warranty and must be replaced anytime the system is serviced.
- Our accumulator / filter driers feature quality welds for a durable, leak-free design in addition to high-quality desiccant for appropriate absorption. For easy installation, necessary gaskets, o-rings and seal are included as well.
- Manufacturer:
- FOUR SEASONS
- Part Number:
- 83125
- Manufacturer Part Number:
- 83125
- Description:
- A/C Receiver Drier
- Long Description:
- Filter Drier
- Part Type:
- Ac Receiver Drier
- Category:
- Hvac
- Subcategory:
- Ac Accumulator And Receiver Drier
Product Details
- Condition:
- New
- Product Fit:
- Direct Fit
- Weight:
- 0.47 pounds
- Height:
- 2.17"
- Width:
- 2.17"
- Length:
- 9.48"
- UOM:
- EA
- Quantity Sold:
- Sold individually
- Qty Per Application:
- 1
- Minimum Order Qty:
- 1
- Item GTIN:
- 096361831254
Technical Details
- CTO
- CN
- Emission Code
- 1
- Harmonized Tariff Code (Schedule B)
- 8415908045
- Harmonized Tariff Code (HTS)
- 8421290065
- Life Cycle Status Code
- 2
- SDS Sheet Number
- 0
- SDR Required Flag
- N
- Maximum Cases per Pallet Layer
- 129
- Pallet Layer Maximum
- 14
- Part Number Superseded To
- 0
- Stock Status
- S
- Taxable
- Y
- Body Diameter
- 1.750 in
- Body Length
- 8.625 in
- Connector B Type
- Pad Mount
- Connector Type
- Pad Mount
- Description
- Filter Driers
- Desiccant
- Yes
- Desiccant Replaceable
- Not Replaceable
- Dia. MM
- 44.45 mm
- Gasket / Seals?
- Included
- In Line Filter Material
- Desiccant
- In Line Filter Outlet Fitting Type
- Pad Mount
- Inlet Filter Fitting Type
- Pad Mount
- Inlet Fitting Diameter
- .402 in
- Inlet Fitting Type
- Pad Mount
- Inlet Fraction
- 3/8 in
- Length MM
- 219.07 mm
- Material
- Aluminum
- Meets / Exceeds OEM?
- Yes
- Mounting Bracket Included
- Not Included
- O-Ring A Number/Desc
- [24611] / Green O-Ring
- Outlet Fitting Type
- Pad Mount
- Outlet Fraction
- 3/8 in
- Outlet IN
- .402 in
- Overall Depth IN
- 8.625 in
- Overall Depth MM
- 219.07 mm
- Pad Mount
- w/ Pad Mount
- Service Port?
- w/o Service Port
- Sight Glass?
- No
- Style
- Aluminum Filter Drier w/ Pad Mount
- Switch Port?
- w/o Switch Port
- Type
- W/ Pad Mount
- Type
- Washer Not Included
- APS
- Mitsubishi Eclipse (11-06); Endeavor (11-04); Galant (12-04)
- Application Summary
- Mitsubishi Eclipse (11-06); Endeavor (11-04); Galant (12-04)
- AAIA Part Type Description
- A/C Receiver Drier
- Long Product Description
- Aluminum Filter Drier w/ Pad Mount
- Extended Product Description
- Aluminum Filter Drier w/ Pad Mount
- FAB
- The accumulator / filter drier acts as a filter by removing moisture and contaminants from the air conditioning system. Such contaminants cannot be removed by flushing, therefore replacing the accumulator / filter drier is essential.
- FAB
- The absorption of moisture in the system is done through the use of a desiccant bag. A leaking or "open" system can cause the bag to become saturated within a few hours making the accumulator/filter drier ineffective.
- FAB
- As a manufacturer in accumulator/filter driers, we offer quality units produced in a ISO/TS16949 & ISO14001 certified facility. State-of-the-art equipment and high quality materials ensure product integrity for long lasting performance customers rely on.
- FAB
- Replacement of the accumulator / filter drier is required to validate compressor warranty and must be replaced anytime the system is serviced.
- FAB
- Our accumulator / filter driers feature quality welds for a durable, leak-free design in addition to high-quality desiccant for appropriate absorption. For easy installation, necessary gaskets, o-rings and seal are included as well.
- Product Description - Invoice
- Filter Drier /Aluminum
- Key Search Words
- Desiccant, Dessicant, Filter Drier, V.I.R. Assembly, VIR Assembly
- KSW
- Desiccant, Dessicant, Filter Drier, V.I.R. Assembly, VIR Assembly
- Label Description
- Aluminum Filter Drier w/ Pad Mount
- Marketing Description
- Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Four Seasons.
- Short Product Description
- Filter Drier
Specifications
The FOUR SEASONS A/C Receiver Drier contains no remanufactured components, and is designed to operate in either city or highway driving.
This part fits at least: 38 vehicles
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 2012 | Mitsubishi | Galant | 2.4L 2378cc L4 GAS FI VIN F U/KHP SOHC Naturally Aspirated | [Filter Drier] Quantity needed per vehicle: 1 |
| 2011 | Mitsubishi | Eclipse | 2.4L 2378cc L4 GAS FI VIN F U/KHP SOHC Naturally Aspirated | [Filter Drier] Quantity needed per vehicle: 1 |
| 2011 | Mitsubishi | Eclipse | 3.8L 3828cc V6 GAS FI VIN T U/KHP SOHC Naturally Aspirated | [Filter Drier] Quantity needed per vehicle: 1 |
| 2011 | Mitsubishi | Endeavor | 3.8L 3828cc V6 GAS FI VIN S U/KHP SOHC Naturally Aspirated | [Filter Drier] Quantity needed per vehicle: 1 |
| 2011 | Mitsubishi | Galant | 2.4L 2378cc L4 GAS FI VIN F U/KHP SOHC Naturally Aspirated | [Filter Drier] Quantity needed per vehicle: 1 |
| 2010 | Mitsubishi | Eclipse | 2.4L 2378cc L4 GAS FI VIN F U/KHP SOHC Naturally Aspirated | [Filter Drier] Quantity needed per vehicle: 1 |
| 2010 | Mitsubishi | Eclipse | 3.8L 3828cc V6 GAS FI VIN T U/KHP SOHC Naturally Aspirated | [Filter Drier] Quantity needed per vehicle: 1 |
| 2010 | Mitsubishi | Endeavor | 3.8L 3828cc V6 GAS FI VIN S U/KHP SOHC Naturally Aspirated | [Filter Drier] Quantity needed per vehicle: 1 |
| 2010 | Mitsubishi | Galant | 2.4L 2378cc L4 GAS FI VIN F U/KHP SOHC Naturally Aspirated | [Filter Drier] Quantity needed per vehicle: 1 |
| 2009 | Mitsubishi | Eclipse | 2.4L 2378cc L4 GAS FI VIN F U/KHP SOHC Naturally Aspirated | [Filter Drier] Quantity needed per vehicle: 1 |
| 2009 | Mitsubishi | Eclipse | 3.8L 3828cc V6 GAS FI VIN T U/KHP SOHC Naturally Aspirated | [Filter Drier] Quantity needed per vehicle: 1 |
| 2009 | Mitsubishi | Galant | 2.4L 2378cc L4 GAS FI VIN F U/KHP SOHC Naturally Aspirated | [Filter Drier] Quantity needed per vehicle: 1 |
| 2009 | Mitsubishi | Galant | 3.8L 3828cc V6 GAS FI VIN S U/KHP SOHC Naturally Aspirated | [Filter Drier] Quantity needed per vehicle: 1 |
| 2009 | Mitsubishi | Galant | 3.8L 3828cc V6 GAS FI VIN T U/KHP SOHC Naturally Aspirated | [Filter Drier] Quantity needed per vehicle: 1 |
| 2008 | Mitsubishi | Eclipse | 2.4L 2378cc L4 GAS FI VIN F U/KHP SOHC Naturally Aspirated | [Filter Drier] Quantity needed per vehicle: 1 |
| 2008 | Mitsubishi | Eclipse | 3.8L 3828cc V6 GAS FI VIN T U/KHP SOHC Naturally Aspirated | [Filter Drier] Quantity needed per vehicle: 1 |
| 2008 | Mitsubishi | Endeavor | 3.8L 3828cc V6 GAS FI VIN S U/KHP SOHC Naturally Aspirated | [Filter Drier] Quantity needed per vehicle: 1 |
| 2008 | Mitsubishi | Galant | 2.4L 2378cc L4 GAS FI VIN F U/KHP SOHC Naturally Aspirated | [Filter Drier] Quantity needed per vehicle: 1 |
| 2008 | Mitsubishi | Galant | 3.8L 3828cc V6 GAS FI VIN T U/KHP SOHC Naturally Aspirated | [Filter Drier] Quantity needed per vehicle: 1 |
| 2007 | Mitsubishi | Eclipse | 2.4L 2378cc L4 GAS FI VIN F U/KHP SOHC Naturally Aspirated | [Filter Drier] Quantity needed per vehicle: 1 |
| 2007 | Mitsubishi | Eclipse | 3.8L 3828cc V6 GAS FI VIN T U/KHP SOHC Naturally Aspirated | [Filter Drier] Quantity needed per vehicle: 1 |
| 2007 | Mitsubishi | Endeavor | 3.8L 3828cc V6 GAS FI VIN S U/KHP SOHC Naturally Aspirated | [Filter Drier] Quantity needed per vehicle: 1 |
| 2007 | Mitsubishi | Galant | 2.4L 2378cc L4 GAS FI VIN F U/KHP SOHC Naturally Aspirated | [Filter Drier] Quantity needed per vehicle: 1 |
| 2007 | Mitsubishi | Galant | 3.8L 3828cc V6 GAS FI VIN S U/KHP SOHC Naturally Aspirated | [Filter Drier] Quantity needed per vehicle: 1 |
| 2007 | Mitsubishi | Galant | 3.8L 3828cc V6 GAS FI VIN T U/KHP SOHC Naturally Aspirated | [Filter Drier] Quantity needed per vehicle: 1 |
| 2006 | Mitsubishi | Eclipse | 2.4L 2378cc L4 GAS FI VIN F U/KHP SOHC Naturally Aspirated | [Filter Drier] Quantity needed per vehicle: 1 |
| 2006 | Mitsubishi | Eclipse | 3.8L 3828cc V6 GAS FI VIN T U/KHP SOHC Naturally Aspirated | [Filter Drier] Quantity needed per vehicle: 1 |
| 2006 | Mitsubishi | Endeavor | 3.8L 3828cc V6 GAS FI VIN S U/KHP SOHC Naturally Aspirated | [Filter Drier] Quantity needed per vehicle: 1 |
| 2006 | Mitsubishi | Galant | 2.4L 2378cc L4 GAS FI VIN F U/KHP SOHC Naturally Aspirated | [Filter Drier] Quantity needed per vehicle: 1 |
| 2006 | Mitsubishi | Galant | 3.8L 3828cc V6 GAS FI VIN S U/KHP SOHC Naturally Aspirated | [Filter Drier] Quantity needed per vehicle: 1 |
| 2005 | Mitsubishi | Endeavor | 3.8L 3828cc V6 GAS FI VIN S U/KHP SOHC Naturally Aspirated | [Filter Drier] Quantity needed per vehicle: 1 |
| 2005 | Mitsubishi | Galant | 2.4L 2378cc L4 GAS FI VIN F U/KHP SOHC Naturally Aspirated | [Filter Drier] Quantity needed per vehicle: 1 |
| 2005 | Mitsubishi | Galant | 3.8L 3828cc V6 GAS FI VIN S U/KHP SOHC Naturally Aspirated | [Filter Drier] Quantity needed per vehicle: 1 |
| 2004 | Mitsubishi | Endeavor | 3.8L 3797cc V6 GAS FI VIN - U/KHP SOHC Naturally Aspirated | [Filter Drier] Quantity needed per vehicle: 1 |
| 2004 | Mitsubishi | Endeavor | 3.8L 3828cc V6 GAS FI VIN S U/KHP SOHC Naturally Aspirated | [Filter Drier] Quantity needed per vehicle: 1 |
| 2004 | Mitsubishi | Galant | 2.4L 2351cc L4 GAS FI VIN - U/KHP SOHC Naturally Aspirated | [Filter Drier] Quantity needed per vehicle: 1 |
| 2004 | Mitsubishi | Galant | 2.4L 2378cc L4 GAS FI VIN F U/KHP SOHC Naturally Aspirated | [Filter Drier] Quantity needed per vehicle: 1 |
| 2004 | Mitsubishi | Galant | 3.8L 3828cc V6 GAS FI VIN S U/KHP SOHC Naturally Aspirated | [Filter Drier] Quantity needed per vehicle: 1 |
Warranty Information
New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages.
For other parts, we provide a limited warranty of 90 days from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quality. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable.
All items are given a limited 90-days warranty period by the manufacturer. The manufacturer will allow the parts to be covered by their warranty provided that the part was not modified by the buyer.
Under NO circumstances will our liability exceed the amount of the original sale.
Products damaged as a result of abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty.
The warranty does not cover airfreight charges, labor expenses, towing expenses, or rental car expenses resulting from installation errors. Return shipping is the responsibility of the buyer. We will not reimburse any return shipping charges incurred.
All returned items must have the RA (Return Authorization) number written outside the shipping box prior to return. The RA Numbers can be obtained by creating a return from within your account. Returned items without RA numbers will not be accepted.
Our liability does not cover lost or stolen packages mailed back by the customer containing the parts being claimed under warranty. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer.