Engine Coolant Bypass Hose - GATES - New GATES Molded Heater Hose
Part: 18896- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation - the leading cause of hose failure
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Caution: Do not use for fuel or oil transfer applications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Manufacturer:
- GATES
- Part Number:
- 18896
- Manufacturer Part Number:
- 18896
- Description:
- Engine Coolant Bypass Hose
- Long Description:
- Molded Heater Hose
- Part Type:
- Engine Coolant Bypass Hose
- Category:
- Belts/Cooling
- Subcategory:
- Hoses And Pipes
Product Details
- Condition:
- New
- Product Fit:
- Direct Fit
- Weight:
- 0.43 pounds
- Height:
- 1.24"
- Width:
- 6.96"
- Length:
- 18.56"
- UOM:
- EA
- Quantity Sold:
- Sold individually
- Qty Per Application:
- 1
- Minimum Order Qty:
- 1
- Item GTIN:
- 072053180985
Technical Details
- CTO
- US
- Harmonized Tariff Code (Schedule B)
- 4009310000
- Life Cycle Status Code
- 4
- SDR Required Flag
- N
- National Popularity Code
- D
- Taxable
- Y
- Centerline Length
- 589 MM
- Centerline Length
- 23.2 IN
- End 1 Inside Diameter
- .62 IN
- End 1 Inside Diameter
- 16 MM
- End 2 Inside Diameter
- .62 IN
- End 2 Inside Diameter
- 16 MM
- Material
- EPDM
- Molded
- Yes
- Quick Connect Fitting Quantity
- 0
- Abbreviated Product Description
- Hose
- Application Summary
- 1995 Ford, Windstar, V-6 3.8 L, By Pass
- Long Product Description
- Premium Molded Heater Hose
- FAB
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- FAB
- Engineered to resist electrochemical degradation - the leading cause of hose failure
- FAB
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- FAB
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- FAB
- Caution: Do not use for fuel or oil transfer applications
- FAB
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- FAB
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Product Description - Invoice
- Molded Heater Hose
- Marketing Description
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today's smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
- Short Product Description
- Heater Hose
- TLE
- Premium Molded Heater Hose
Specifications
The GATES Engine Coolant Bypass Hose contains no remanufactured components, and is designed to operate in either city or highway driving.
This part fits at least: 10 vehicles
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 1995 | Ford | Windstar | 3.8L -cc V6 GAS FI VIN 4 U/KHP OHV Naturally Aspirated | [Molded Heater Hose] GAS; Quantity needed per vehicle: 1 |
| 1993 | Ford | Taurus | 3.8L -cc V6 GAS FI VIN 4 U/KHP OHV Naturally Aspirated | [Molded Heater Hose] GAS; Quantity needed per vehicle: 1 |
| 1993 | Lincoln | Continental | 3.8L -cc V6 GAS FI VIN 4 U/KHP OHV Naturally Aspirated | [Molded Heater Hose] GAS; Quantity needed per vehicle: 1 |
| 1993 | Mercury | Sable | 3.8L -cc V6 GAS FI VIN 4 U/KHP OHV Naturally Aspirated | [Molded Heater Hose] GAS; Quantity needed per vehicle: 1 |
| 1992 | Ford | Taurus | 3.8L -cc V6 GAS FI VIN 4 U/KHP OHV Naturally Aspirated | [Molded Heater Hose] GAS; Quantity needed per vehicle: 1 |
| 1992 | Lincoln | Continental | 3.8L -cc V6 GAS FI VIN 4 U/KHP OHV Naturally Aspirated | [Molded Heater Hose] GAS; Quantity needed per vehicle: 1 |
| 1992 | Mercury | Sable | 3.8L -cc V6 GAS FI VIN 4 U/KHP OHV Naturally Aspirated | [Molded Heater Hose] GAS; Quantity needed per vehicle: 1 |
| 1991 | Ford | Taurus | 3.8L -cc V6 GAS FI VIN 4 U/KHP OHV Naturally Aspirated | [Molded Heater Hose] GAS; Quantity needed per vehicle: 1 |
| 1991 | Lincoln | Continental | 3.8L -cc V6 GAS FI VIN 4 U/KHP OHV Naturally Aspirated | [Molded Heater Hose] GAS; Quantity needed per vehicle: 1 |
| 1991 | Mercury | Sable | 3.8L -cc V6 GAS FI VIN 4 U/KHP OHV Naturally Aspirated | [Molded Heater Hose] GAS; Quantity needed per vehicle: 1 |
Warranty Information
New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages.
For other parts, we provide a limited warranty of 90 days from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quality. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable.
All items are given a limited 90-days warranty period by the manufacturer. The manufacturer will allow the parts to be covered by their warranty provided that the part was not modified by the buyer.
Under NO circumstances will our liability exceed the amount of the original sale.
Products damaged as a result of abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty.
The warranty does not cover airfreight charges, labor expenses, towing expenses, or rental car expenses resulting from installation errors. Return shipping is the responsibility of the buyer. We will not reimburse any return shipping charges incurred.
All returned items must have the RA (Return Authorization) number written outside the shipping box prior to return. The RA Numbers can be obtained by creating a return from within your account. Returned items without RA numbers will not be accepted.
Our liability does not cover lost or stolen packages mailed back by the customer containing the parts being claimed under warranty. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer.