Engine Crankcase Breather Cap - GATES - New GATES Oil Breather Cap
Part: 31288- To assure proper operation of PCV systems, oil filler caps should be cleaned or replaced every 12,000 miles
- Sealed construction prevents engine crankcase gases from escaping into the atmosphere
- Heavy-gauge steel construction resists underhood heat and corrosion.
- Manufacturer:
- GATES
- Part Number:
- 31288
- Manufacturer Part Number:
- 31288
- Description:
- Engine Crankcase Breather Cap
- Long Description:
- Oil Breather Cap
- Part Type:
- Engine Crankcase Breather Cap
- Category:
- Emission Control
- Subcategory:
- Hardware Fasteners And Fittings
Product Details
- Condition:
- New
- Product Fit:
- Direct Fit
- Weight:
- 0.2 pounds
- Height:
- 3.625"
- Width:
- 3"
- Length:
- 3.625"
- UOM:
- EA
- Quantity Sold:
- Sold individually
- Qty Per Application:
- 1
- Minimum Order Qty:
- 1
- Item GTIN:
- 072053979152
Technical Details
- Cam Type
- Push Plug
- Cap Neck Depth
- 2.78 IN
- Gasket Or Seal Material
- Rubber
- Height
- 2.78 IN
- Housing Color
- Black
- Housing Material
- Plastic, Rubber
- Neck Diameter
- 1.37 IN
- Shell Outside Diameter
- 2.28 IN
- Type
- Crankcase Breather Cap
- Universal Or Specific Fit
- Specific Fit
- Width
- 2.3 IN
- Abbreviated Product Description
- Cap
- Application Summary
- 1985-1983 Ford, Ranger, V-6 2.8 L, Oil Breather Cap
- Long Product Description
- Engine Oil Breather Cap
- FAB
- To assure proper operation of PCV systems, oil filler caps should be cleaned or replaced every 12,000 miles
- FAB
- Sealed construction prevents engine crankcase gases from escaping into the atmosphere
- FAB
- Heavy-gauge steel construction resists underhood heat and corrosion.
- Product Description - Invoice
- Oil Breather Cap
- Marketing Description
- Meets requirements of emission control systems on late model cars and light trucks. Universal design offers maximum coverage with minimum inventory.
- Short Product Description
- Oil Cap
- TLE
- Engine Oil Breather Cap
- CTO
- CN
- Harmonized Tariff Code (Schedule B)
- 8708998180
- Life Cycle Status Code
- A
- SDR Required Flag
- N
- National Popularity Code
- D
- Taxable
- Y
Specifications
The GATES Engine Crankcase Breather Cap contains no remanufactured components, and is designed to operate in either city or highway driving.
This part fits at least: 9 vehicles
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 1989 | Merkur | Scorpio | 2.9L -cc V6 GAS FI VIN V U/KHP OHV Naturally Aspirated | [Oil Breather Cap] GAS; Quantity needed per vehicle: 1 |
| 1988 | Merkur | Scorpio | 2.9L -cc V6 GAS FI VIN V U/KHP OHV Naturally Aspirated | [Oil Breather Cap] GAS; Quantity needed per vehicle: 1 |
| 1985 | Ford | Bronco II | 2.8L -cc V6 GAS CARB VIN S U/KHP OHV Naturally Aspirated | [Oil Breather Cap] GAS; Quantity needed per vehicle: 1 |
| 1985 | Ford | Ranger | 2.8L -cc V6 GAS CARB VIN S U/KHP OHV Naturally Aspirated | [Oil Breather Cap] GAS; Quantity needed per vehicle: 1 |
| 1984 | Ford | Bronco II | 2.8L -cc V6 GAS CARB VIN S U/KHP OHV Naturally Aspirated | [Oil Breather Cap] GAS; Quantity needed per vehicle: 1 |
| 1984 | Ford | Ranger | 2.8L -cc V6 GAS CARB VIN S U/KHP OHV Naturally Aspirated | [Oil Breather Cap] GAS; Quantity needed per vehicle: 1 |
| 1983 | Ford | Ranger | 2.8L -cc V6 GAS CARB VIN S U/KHP OHV Naturally Aspirated | [Oil Breather Cap] GAS; Quantity needed per vehicle: 1 |
| 1979 | Ford | Mustang | 2.8L -cc V6 GAS CARB VIN Z U/KHP OHV Naturally Aspirated | [Oil Breather Cap] GAS; Quantity needed per vehicle: 1 |
| 1978 | Ford | Mustang II | 2.8L -cc V6 GAS CARB VIN Z U/KHP OHV Naturally Aspirated | [Oil Breather Cap] GAS; Quantity needed per vehicle: 1 |
Warranty Information
New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages.
For other parts, we provide a limited warranty of 90 days from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quality. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable.
All items are given a limited 90-days warranty period by the manufacturer. The manufacturer will allow the parts to be covered by their warranty provided that the part was not modified by the buyer.
Under NO circumstances will our liability exceed the amount of the original sale.
Products damaged as a result of abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty.
The warranty does not cover airfreight charges, labor expenses, towing expenses, or rental car expenses resulting from installation errors. Return shipping is the responsibility of the buyer. We will not reimburse any return shipping charges incurred.
All returned items must have the RA (Return Authorization) number written outside the shipping box prior to return. The RA Numbers can be obtained by creating a return from within your account. Returned items without RA numbers will not be accepted.
Our liability does not cover lost or stolen packages mailed back by the customer containing the parts being claimed under warranty. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer.