Radiator Coolant Hose - GATES - New GATES Molded Coolant Hose
Part: 51998- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Pre-shaped to fit and to ensure perfectly sealed conditions
- Specifically-engineered materials resist collapse under vacuum
- EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Caution: Do not use for fuel or oil transfer applications
- Manufacturer:
- GATES
- Part Number:
- 51998
- Manufacturer Part Number:
- 51998
- Description:
- Radiator Coolant Hose
- Long Description:
- Molded Coolant Hose
- Part Type:
- Radiator Coolant Hose
- Category:
- Belts/Cooling
- Subcategory:
- Hoses And Pipes
Product Details
- Condition:
- New
- Product Fit:
- Direct Fit
- Weight:
- 0.62 pounds
- Height:
- 3.5"
- Width:
- 4"
- Length:
- 14"
- UOM:
- EA
- Quantity Sold:
- Sold individually
- Qty Per Application:
- 1
- Minimum Order Qty:
- 1
- Item GTIN:
- 770075841142
Technical Details
- CTO
- TR
- Harmonized Tariff Code (Schedule B)
- 4009310000
- Life Cycle Status Code
- 4
- SDR Required Flag
- N
- National Popularity Code
- N
- Taxable
- Y
- Abbreviated Product Description
- Hose
- Application Summary
- 2018-17 Toyota, Corolla, 4-Cyl. 1.8 L, Upper - Rad. To Pipe
- Long Product Description
- Premium Molded Coolant Hose
- FAB
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- FAB
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- FAB
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- FAB
- Pre-shaped to fit and to ensure perfectly sealed conditions
- FAB
- Specifically-engineered materials resist collapse under vacuum
- FAB
- EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
- FAB
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- FAB
- Caution: Do not use for fuel or oil transfer applications
- Product Description - Invoice
- Molded Coolant Hose
- Marketing Description
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
- Short Product Description
- Coolant Hose
- TLE
- Premium Molded Coolant Hose
- Centerline Length
- 445 MM
- Centerline Length
- 17.5 IN
- Contains Spring
- No
- End 1 Inside Diameter
- 1.25 IN
- End 1 Inside Diameter
- 32 MM
- End 2 Inside Diameter
- 1.25 IN
- End 2 Inside Diameter
- 32 MM
- Material
- EPDM
- Modular
- No
- Molded
- Yes
- Quick Connect Fitting Quantity
- 0
Specifications
The GATES Radiator Coolant Hose contains no remanufactured components, and is designed to operate in either city or highway driving.
This part fits at least: 3 vehicles
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 2018 | Toyota | Corolla iM | 1.8L 1798cc L4 GAS FI VIN - 137HP DOHC Naturally Aspirated | [Molded Coolant Hose] Upper - Radiator To Pipe; GAS; Quantity needed per vehicle: 1 |
| 2017 | Toyota | Corolla iM | 1.8L 1798cc L4 GAS FI VIN - 137HP DOHC Naturally Aspirated | [Molded Coolant Hose] Upper - Radiator To Pipe; GAS; Quantity needed per vehicle: 1 |
| 2016 | Scion | iM | 1.8L 1798cc L4 GAS FI VIN - 137HP DOHC Naturally Aspirated | [Molded Coolant Hose] Upper - Radiator To Pipe; GAS; Quantity needed per vehicle: 1 |
Warranty Information
New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages.
For other parts, we provide a limited warranty of 90 days from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quality. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable.
All items are given a limited 90-days warranty period by the manufacturer. The manufacturer will allow the parts to be covered by their warranty provided that the part was not modified by the buyer.
Under NO circumstances will our liability exceed the amount of the original sale.
Products damaged as a result of abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty.
The warranty does not cover airfreight charges, labor expenses, towing expenses, or rental car expenses resulting from installation errors. Return shipping is the responsibility of the buyer. We will not reimburse any return shipping charges incurred.
All returned items must have the RA (Return Authorization) number written outside the shipping box prior to return. The RA Numbers can be obtained by creating a return from within your account. Returned items without RA numbers will not be accepted.
Our liability does not cover lost or stolen packages mailed back by the customer containing the parts being claimed under warranty. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer.