Ignition Contact Set - STANDARD MOTOR PRODUCTS - New STANDARD MOTOR PRODUCTS Ignition Contact Set
Part: DR-1819- A lubricated felt pad that lubricates the cam lobes on the vehicles distributor. This reduces wear on the point set rubbing block, extending the usable life of the part.
- Ventilated where available, tungsten contacts, which run cooler and exhibit less erosion.
- Our units are all pre-aligned and pre-adjusted to save installation time and ensure proper switching.
- The copper-alloy shunt provides superior resistance to breakage, due to the flexing of the moving arm on the point set. It also significantly increases current conductivity over typical steel, shunts.
- As a global manufacturer of original equipment ignition products, we maintain complete quality control throughout the manufacturing process from componentry to finished product
- A premier manufacturer serving the automotive aftermarket since 1919, we deliver the highest quality and best coverage to meet your ignition needs
- Manufacturer:
- STANDARD MOTOR PRODUCTS
- Part Number:
- DR-1819
- Manufacturer Part Number:
- DR-1819
- Description:
- Ignition Contact Set
- Long Description:
- Ignition Contact Set
- Part Type:
- Ignition Contact Set
- Category:
- Ignition
- Subcategory:
- Primary Ignition
Product Details
- Condition:
- New
- Product Fit:
- Direct Fit
- Weight:
- 0.03 pounds
- Height:
- 3"
- Width:
- 1.125"
- Length:
- 1.5"
- UOM:
- EA
- Quantity Sold:
- Sold individually
- Qty Per Application:
- 1
- Minimum Order Qty:
- 1
- Item GTIN:
- 091769004361
Technical Details
- Abbreviated Product Description
- Points
- AAIA Part Type Description
- Ignition Contact Set
- Long Product Description
- Contact Set (Points)
- FAB
- A lubricated felt pad that lubricates the cam lobes on the vehicles distributor. This reduces wear on the point set rubbing block, extending the usable life of the part.
- FAB
- Ventilated where available, tungsten contacts, which run cooler and exhibit less erosion.
- FAB
- Our units are all pre-aligned and pre-adjusted to save installation time and ensure proper switching.
- FAB
- The copper-alloy shunt provides superior resistance to breakage, due to the flexing of the moving arm on the point set. It also significantly increases current conductivity over typical steel, shunts.
- FAB
- As a global manufacturer of original equipment ignition products, we maintain complete quality control throughout the manufacturing process from componentry to finished product
- FAB
- A premier manufacturer serving the automotive aftermarket since 1919, we deliver the highest quality and best coverage to meet your ignition needs
- Product Description - Invoice
- Contact Set (Points)
- Short Product Description
- Contact Set (Points)
- Contents
- Points
- CTO
- MX
- Harmonized Tariff Code (HTS)
- 8511906040
- Life Cycle Status Code
- 2
- Life Cycle Status Description
- Available to Order
- SDR Required Flag
- N
- National Popularity Description
- Next 15% of Product Group Sales Value
- NPS
- C
- Maximum Cases per Pallet Layer
- 8
- Pallet Layer Maximum
- 3
- PRC
- NEW
- Warranty Distance
- 36000
- Warranty Distance UOM
- MI
- Warranty Time
- 36
- Warranty Time UOM
- MO
Specifications
The STANDARD MOTOR PRODUCTS Ignition Contact Set contains no remanufactured components, and is designed to operate in either city or highway driving.
This part fits at least: 46 vehicles
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 1940 | Graham | Custom Model 107 | -L -cc -- U/K - VIN - U/KHP U/K - U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1940 | Graham | Custom Model 108 | -L -cc -- U/K - VIN - U/KHP U/K - U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1940 | Graham | Deluxe Model 107 | -L -cc -- U/K - VIN - U/KHP U/K - U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1939 | Graham | Custom Special 96 | -L -cc -- U/K - VIN - U/KHP U/K - U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1939 | Graham | Model 97 | -L -cc -- U/K - VIN - U/KHP U/K - U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1939 | Graham | Special Model 96 | -L -cc -- U/K - VIN - U/KHP U/K - U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1938 | Graham | Custom Model 97 | -L -cc -- U/K - VIN - U/KHP U/K - U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1938 | Graham | Model 97 | -L -cc -- U/K - VIN - U/KHP U/K - U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1938 | Graham | Special Model 96 | -L -cc -- U/K - VIN - U/KHP U/K - U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1938 | Graham | Standard Model 96 | -L -cc -- U/K - VIN - U/KHP U/K - U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1937 | Graham | Cavalier | -L -cc -- U/K - VIN - U/KHP U/K - U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1937 | Graham | Crusader | -L -cc -- U/K - VIN - U/KHP U/K - U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1937 | Graham | Series 116 | -L -cc -- U/K - VIN - U/KHP U/K - U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1937 | Graham | Series 120 | -L -cc -- U/K - VIN - U/KHP U/K - U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1936 | Graham | Cavalier Model 90 | -L -cc -- U/K - VIN - U/KHP U/K - U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1936 | Graham | Crusader Model 80 | -L -cc -- U/K - VIN - U/KHP U/K - U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1936 | Graham | Model 110 | -L -cc -- U/K - VIN - U/KHP U/K - U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1936 | Studebaker | Dictator | 3.6L 3570cc L6 GAS CARB VIN - 90HP L-HEAD Naturally Aspirated U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1935 | GMC | T16L | 3.5L 3496cc L6 GAS CARB VIN - U/KHP L-HEAD Naturally Aspirated U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1935 | Graham | Model 68 | -L -cc -- U/K - VIN - U/KHP U/K - U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1935 | Graham | Model 74 | -L -cc -- U/K - VIN - U/KHP U/K - U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1935 | Oldsmobile | F-35 | 3.5L 3496cc L6 GAS CARB VIN - 90HP L-HEAD Naturally Aspirated U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1935 | Studebaker | Dictator | 3.3L 3365cc L6 GAS CARB VIN - 88HP L-HEAD Naturally Aspirated U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1934 | Graham | Model 68 | -L -cc -- U/K - VIN - U/KHP U/K - U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1934 | Plymouth | Deluxe PE Model | 3.3L 3299cc L6 GAS CARB VIN - 77HP L-HEAD Naturally Aspirated U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1934 | Plymouth | Standard PF Model | -L -cc -- U/K - VIN - U/KHP U/K - U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1934 | Plymouth | Standard PG Model | -L -cc -- U/K - VIN - U/KHP U/K - U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1934 | Studebaker | Dictator | 3.3L 3365cc L6 GAS CARB VIN - 88HP L-HEAD Naturally Aspirated U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1934 | Studebaker | Dictator Special | -L -cc -- U/K - VIN - U/KHP U/K - U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1933 | Graham | Model 65 | -L -cc -- U/K - VIN - U/KHP U/K - U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1932 | Graham | Special | -L -cc -- U/K - VIN - U/KHP U/K - U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1932 | Graham | Standard | -L -cc -- U/K - VIN - U/KHP U/K - U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1932 | Studebaker | Dictator Model 62 | 3.6L 3622cc L8 GAS CARB VIN - 85HP L-HEAD Naturally Aspirated U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1931 | Graham | Special | -L -cc -- U/K - VIN - U/KHP U/K - U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1931 | Graham | Standard | -L -cc -- U/K - VIN - U/KHP U/K - U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1931 | Studebaker | Dictator Model 61 | 3.3L 3365cc L6 GAS CARB VIN - 70HP L-HEAD Naturally Aspirated U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1930 | Elcar | Model 75A | -L -cc -- U/K - VIN - U/KHP U/K - U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1930 | Graham | Standard | -L -cc -- U/K - VIN - U/KHP U/K - U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1930 | Graham-Paige | Model 612 | -L -cc -- U/K - VIN - U/KHP U/K - U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1930 | Graham-Paige | Model 615 | -L -cc -- U/K - VIN - U/KHP U/K - U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1930 | Studebaker | Dictator | 3.3L 3365cc L6 GAS CARB VIN - 70HP L-HEAD Naturally Aspirated U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1929 | Elcar | Model 75 | -L -cc -- U/K - VIN - U/KHP U/K - U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1929 | Graham-Paige | Model 612 | -L -cc -- U/K - VIN - U/KHP U/K - U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1929 | Graham-Paige | Model 615 | -L -cc -- U/K - VIN - U/KHP U/K - U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1928 | Auburn | Model 6-66 | -L -cc -- U/K - VIN - U/KHP U/K - U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
| 1927 | Auburn | Model 6-66 | -L -cc -- U/K - VIN - U/KHP U/K - U/K | [Ignition Contact Set] Quantity needed per vehicle: 1 |
Warranty Information
New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages.
For other parts, we provide a limited warranty of 90 days from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quality. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable.
All items are given a limited 90-days warranty period by the manufacturer. The manufacturer will allow the parts to be covered by their warranty provided that the part was not modified by the buyer.
Under NO circumstances will our liability exceed the amount of the original sale.
Products damaged as a result of abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty.
The warranty does not cover airfreight charges, labor expenses, towing expenses, or rental car expenses resulting from installation errors. Return shipping is the responsibility of the buyer. We will not reimburse any return shipping charges incurred.
All returned items must have the RA (Return Authorization) number written outside the shipping box prior to return. The RA Numbers can be obtained by creating a return from within your account. Returned items without RA numbers will not be accepted.
Our liability does not cover lost or stolen packages mailed back by the customer containing the parts being claimed under warranty. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer.