Direct Ignition Coil Kit - STANDARD MOTOR PRODUCTS - New STANDARD MOTOR PRODUCTS Direct Ignition Coil Kit
Part: FD502K6- Primary and Secondary windings feature enamel magnet wire for the highest temperature rating in the aftermarket
- When one ignition coil fails, you should replace all of the ignition coils with a new set because one worn out coil means the other coils have been subjected to the same extreme heat, stress and wear
- High-temp boot prevents high-voltage leaks, while stainless-steel spring with internal ferrite noise suppressor prevents radiofrequency interference (RFI)
- Isolator manufactured using high voltage-resistant thermoplastics to prevent premature coil failure
- Designed and manufactured to SMP's strict quality standards, so you can install with confidence
- Our ignition coils use 100% pure copper windings in the primary and secondary bobbins to improve durability and provide higher resistance to internal shorts and dielectric breakdown
- Manufacturer:
- STANDARD MOTOR PRODUCTS
- Part Number:
- FD502K6
- Manufacturer Part Number:
- FD502K6
- Description:
- Direct Ignition Coil Kit
- Long Description:
- Direct Ignition Coil Kit
- Part Type:
- Direct Ignition Coil Kit
- Category:
- Ignition
- Subcategory:
- Ignition Coil
Product Details
- Condition:
- New
- Product Fit:
- Direct Fit
- Weight:
- 0.49 pounds
- Height:
- 7.125"
- Width:
- 2.75"
- Length:
- 2.75"
- UOM:
- EA
- Quantity Sold:
- Sold individually
- Qty Per Application:
- 1
- Minimum Order Qty:
- 1
- Item GTIN:
- 033086575773
Technical Details
- CTO
- PL
- Harmonized Tariff Code (HTS)
- 8511300080
- Life Cycle Status Code
- 2
- Life Cycle Status Description
- Available to Order
- SDR Required Flag
- N
- National Popularity Description
- Next 20% of Product Group Sales Value
- NPS
- B
- Maximum Cases per Pallet Layer
- 4
- Pallet Layer Maximum
- 4
- PRC
- NEW
- Warranty Special
- Limited Lifetime
- Warranty Special UOM
- TX
- Connector Shape
- Rectangular
- Mount Type
- Bolt On
- Mounting Position
- Valve Cover
- O.E.M. Replacement
- Yes
- Terminal Gender
- Male
- Terminal Quantity
- 2
- Terminal Type
- Blade
- Voltage
- 12
- Abbreviated Product Description
- Coil Kit
- AAIA Part Type Description
- Direct Ignition Coil Kit
- Long Product Description
- Direct Ignition Coil Kit
- FAB
- Primary and Secondary windings feature enamel magnet wire for the highest temperature rating in the aftermarket
- FAB
- When one ignition coil fails, you should replace all of the ignition coils with a new set because one worn out coil means the other coils have been subjected to the same extreme heat, stress and wear
- FAB
- High-temp boot prevents high-voltage leaks, while stainless-steel spring with internal ferrite noise suppressor prevents radiofrequency interference (RFI)
- FAB
- Isolator manufactured using high voltage-resistant thermoplastics to prevent premature coil failure
- FAB
- Designed and manufactured to SMP's strict quality standards, so you can install with confidence
- FAB
- Our ignition coils use 100% pure copper windings in the primary and secondary bobbins to improve durability and provide higher resistance to internal shorts and dielectric breakdown
- Product Description - Invoice
- Direct Ignition Coil Kit
- Short Product Description
- Ignition Coil Kit
- Coil Type
- Electronic
- Connector Gender
- Female
- Connector Quantity
- 1
Specifications
The STANDARD MOTOR PRODUCTS Direct Ignition Coil Kit contains no remanufactured components, and is designed to operate in either city or highway driving.
This part fits at least: 30 vehicles
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 2011 | Mazda | Tribute | 3.0L 2968cc V6 FLEX FI VIN G U/KHP DOHC Naturally Aspirated Duratec | [Direct Ignition Coil Kit] Quantity needed per vehicle: 1 |
| 2010 | Mazda | Tribute | 3.0L 2968cc V6 FLEX FI VIN G U/KHP DOHC Naturally Aspirated Duratec | [Direct Ignition Coil Kit] Quantity needed per vehicle: 1 |
| 2008 | Ford | Escape | 3.0L 2968cc V6 GAS FI VIN 1 U/KHP DOHC Naturally Aspirated Duratec | [Direct Ignition Coil Kit] Quantity needed per vehicle: 1 |
| 2008 | Mazda | Tribute | 3.0L 2968cc V6 GAS FI VIN 1 U/KHP DOHC Naturally Aspirated Duratec | [Direct Ignition Coil Kit] Quantity needed per vehicle: 1 |
| 2008 | Mercury | Mariner | 3.0L 2968cc V6 GAS FI VIN 1 U/KHP DOHC Naturally Aspirated Duratec | [Direct Ignition Coil Kit] Quantity needed per vehicle: 1 |
| 2007 | Ford | Escape | 3.0L 2968cc V6 GAS FI VIN 1 U/KHP DOHC Naturally Aspirated Duratec | [Direct Ignition Coil Kit] Quantity needed per vehicle: 1 |
| 2007 | Ford | Five Hundred | 3.0L 2968cc V6 GAS FI VIN 1 U/KHP DOHC Naturally Aspirated Duratec | [Direct Ignition Coil Kit] Quantity needed per vehicle: 1 |
| 2007 | Ford | Freestyle | 3.0L 2968cc V6 GAS FI VIN 1 U/KHP DOHC Naturally Aspirated Duratec | [Direct Ignition Coil Kit] Quantity needed per vehicle: 1 |
| 2007 | Mercury | Mariner | 3.0L 2968cc V6 GAS FI VIN 1 U/KHP DOHC Naturally Aspirated Duratec | [Direct Ignition Coil Kit] Quantity needed per vehicle: 1 |
| 2007 | Mercury | Montego | 3.0L 2968cc V6 GAS FI VIN 1 U/KHP DOHC Naturally Aspirated Duratec | [Direct Ignition Coil Kit] Quantity needed per vehicle: 1 |
| 2006 | Ford | Escape | 3.0L 2968cc V6 GAS FI VIN 1 U/KHP DOHC Naturally Aspirated Duratec | [Direct Ignition Coil Kit] Quantity needed per vehicle: 1 |
| 2006 | Ford | Five Hundred | 3.0L 2968cc V6 GAS FI VIN 1 U/KHP DOHC Naturally Aspirated Duratec | [Direct Ignition Coil Kit] Quantity needed per vehicle: 1 |
| 2006 | Ford | Freestyle | 3.0L 2968cc V6 GAS FI VIN 1 U/KHP DOHC Naturally Aspirated Duratec | [Direct Ignition Coil Kit] Quantity needed per vehicle: 1 |
| 2006 | Mazda | Tribute | 3.0L 2968cc V6 GAS FI VIN 1 U/KHP DOHC Naturally Aspirated Duratec | [Direct Ignition Coil Kit] Quantity needed per vehicle: 1 |
| 2006 | Mercury | Mariner | 3.0L 2968cc V6 GAS FI VIN 1 U/KHP DOHC Naturally Aspirated Duratec | [Direct Ignition Coil Kit] Quantity needed per vehicle: 1 |
| 2006 | Mercury | Montego | 3.0L 2968cc V6 GAS FI VIN 1 U/KHP DOHC Naturally Aspirated Duratec | [Direct Ignition Coil Kit] Quantity needed per vehicle: 1 |
| 2005 | Ford | Escape | 3.0L 2968cc V6 GAS FI VIN 1 U/KHP DOHC Naturally Aspirated Duratec | [Direct Ignition Coil Kit] Quantity needed per vehicle: 1 |
| 2005 | Ford | Five Hundred | 3.0L 2968cc V6 GAS FI VIN 1 U/KHP DOHC Naturally Aspirated Duratec | [Direct Ignition Coil Kit] Quantity needed per vehicle: 1 |
| 2005 | Ford | Freestyle | 3.0L 2968cc V6 GAS FI VIN 1 U/KHP DOHC Naturally Aspirated Duratec | [Direct Ignition Coil Kit] Quantity needed per vehicle: 1 |
| 2005 | Mazda | Tribute | 3.0L 2968cc V6 GAS FI VIN 1 U/KHP DOHC Naturally Aspirated Duratec | [Direct Ignition Coil Kit] Quantity needed per vehicle: 1 |
| 2005 | Mercury | Mariner | 3.0L 2968cc V6 GAS FI VIN 1 U/KHP DOHC Naturally Aspirated Duratec | [Direct Ignition Coil Kit] Quantity needed per vehicle: 1 |
| 2005 | Mercury | Montego | 3.0L 2968cc V6 GAS FI VIN 1 U/KHP DOHC Naturally Aspirated Duratec | [Direct Ignition Coil Kit] Quantity needed per vehicle: 1 |
| 2004 | Ford | Escape | 3.0L 2968cc V6 GAS FI VIN 1 U/KHP DOHC Naturally Aspirated Duratec | [Direct Ignition Coil Kit] Quantity needed per vehicle: 1 |
| 2004 | Mazda | Tribute | 3.0L 2968cc V6 GAS FI VIN 1 U/KHP DOHC Naturally Aspirated Duratec | [Direct Ignition Coil Kit] Quantity needed per vehicle: 1 |
| 2003 | Ford | Escape | 3.0L 2968cc V6 GAS FI VIN 1 U/KHP DOHC Naturally Aspirated Duratec | [Direct Ignition Coil Kit] Quantity needed per vehicle: 1 |
| 2003 | Mazda | Tribute | 3.0L 2968cc V6 GAS FI VIN 1 U/KHP DOHC Naturally Aspirated Duratec | [Direct Ignition Coil Kit] Quantity needed per vehicle: 1 |
| 2002 | Ford | Escape | 3.0L 2968cc V6 GAS FI VIN 1 U/KHP DOHC Naturally Aspirated Duratec | [Direct Ignition Coil Kit] Quantity needed per vehicle: 1 |
| 2002 | Mazda | Tribute | 3.0L 2968cc V6 GAS FI VIN 1 U/KHP DOHC Naturally Aspirated Duratec | [Direct Ignition Coil Kit] Quantity needed per vehicle: 1 |
| 2001 | Ford | Escape | 3.0L 2968cc V6 GAS FI VIN 1 U/KHP DOHC Naturally Aspirated Duratec | [Direct Ignition Coil Kit] Quantity needed per vehicle: 1 |
| 2001 | Mazda | Tribute | 3.0L 2968cc V6 GAS FI VIN 1 U/KHP DOHC Naturally Aspirated Duratec | [Direct Ignition Coil Kit] Quantity needed per vehicle: 1 |
Warranty Information
New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages.
For other parts, we provide a limited warranty of 90 days from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quality. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable.
All items are given a limited 90-days warranty period by the manufacturer. The manufacturer will allow the parts to be covered by their warranty provided that the part was not modified by the buyer.
Under NO circumstances will our liability exceed the amount of the original sale.
Products damaged as a result of abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty.
The warranty does not cover airfreight charges, labor expenses, towing expenses, or rental car expenses resulting from installation errors. Return shipping is the responsibility of the buyer. We will not reimburse any return shipping charges incurred.
All returned items must have the RA (Return Authorization) number written outside the shipping box prior to return. The RA Numbers can be obtained by creating a return from within your account. Returned items without RA numbers will not be accepted.
Our liability does not cover lost or stolen packages mailed back by the customer containing the parts being claimed under warranty. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer.